THIS MACHINE IS IN GOOD SHAPE IT DOES HAVE A 25 HORSE POWER KOHLER ON IT WITH A 60 INCH COMMERCIAL DECK. WOULD MAKE SOMEONE A GOOD BACK UP UNIT OR IF YOUR JUST STARTING OUT IN LANDSCAPING BUINESS THIS IS A GOOD STARTER MACHINE AS IT IS COMMERCIAL GRADE!
Information
Width:60 in Engine Type:Gas Drive Type:2WD 20x11-10 knobby traction tires
Highlights
Sale Price $5,500.00 Location Port Crane, New York Condition Pre-Owned Stock Number 81729 Year 2018 Make John Deere Model Z915E 48 VIN 1TC915ECLJT062401 Engine CV742 Horsepower 25 Engine Hours 545 Transmission Hydrostatic Fuel Type Gasoline Status Available Width With chute down: 62 in (157 cm) Height of-cut range, Increments: 0.25 in. (0.64 cm), 1-5.5 in. (2.54-14 cm) | With ROPS up: 73 in. (185 cm) | With ROPS down: 47 in. (119 cm)
Specifications
Year 2018 Manufacturer John Deere Model Name Z915E Trim Name 48 Generic Type (Primary) Riding Engine CV742 Engine Power At 3,600 rpm, 25 hp (18.6 kW) Displacement 45.6 cu in. (747 cc) Cylinder Liners Two Oil Filter Full flow, replaceable Lubrication Full pressure Cooling Air Air Cleaner Pre-cleaner, Yes, Heavy-duty canister type with safety element Fuel Type Gasoline PTO Type Electro-magnetic, 200 lb-ft (271 Nm) | Drive: V-belt Drivetrain Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor Transmission Hydrostatic Brake System Type Dynamic: Twin levers Parking Brake Internal wet disk integrated in the transmission | actuation: Hand brake Tires, Front Specification Drive: 24x9.5-12 Tires, Rear Specification Load rating: 4 PR Wheels, Caster Specifications type: Pneumatic Front | size: 13x5-6 | Front anti-scalp rollers: RH, center, LH Battery 12 V Charging System 15 amp Electrical Cold cranking amp: 300 amp Operating Speed Speed range: 0-10 mph (0-16.1 km/h) | Travel, Forward: 0-10 mph (0-16.1 km/h) | Travel, Reverse: 0-4.5 mph (0-7.2 km/h) Operating Conditions Speed and direction control: Twin levers | Filter: Internal, replaceable Top Speed Blades, Tip Approximately: 18,000 fpm (5,486 m/min) Fuel Usage, 100% Load 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr) Under normal conditions, load, operation, and dependent on loads and operating conditions Construction Material, Deck One-piece stamped steel with reinforcements Deck Thickness 7 gauge 0.18 in. (4.6 mm) Discharge Type Side Dimensions Blades Thickness: 0.25 in. (0.64 cm) | Mower deck: 48 in. (122 cm) Width With chute down: 62 in (157 cm) Height of-cut range, Increments: 0.25 in. (0.64 cm), 1-5.5 in. (2.54-14 cm) | With ROPS up: 73 in. (185 cm) | With ROPS down: 47 in. (119 cm) Cutting Width 48 in (122 cm) Length 84 in. (213 cm) | Blades: Varies by deck size Hydraulic Capacity 5.9 U.S. qt (5.6 L) | Crankcase With filter: 2 U.S. qt (1.9 L) Fuel Capacity 11.5 U.S. gal. (43.5 L) Weight 1,100 to 1,178 lb (499 to 534 kg) Features Fuel tank switch/shut-off valve | Hour meter: Standard, digital | Operator presence starting system: Brake-N-Go (hand) Knife Quantity Three Warranty 36 months or 1200 hours, whichever comes first, First 24 months, no hour limitation