Back

2018 John Deere Z915E 48

THIS MACHINE IS IN GOOD SHAPE IT DOES HAVE A 25 HORSE POWER KOHLER ON IT WITH A 60 INCH COMMERCIAL DECK. WOULD MAKE SOMEONE A GOOD BACK UP UNIT OR IF YOUR JUST STARTING OUT IN LANDSCAPING BUINESS THIS IS A GOOD STARTER MACHINE AS IT IS COMMERCIAL GRADE!
MoreLess
Limited Time Offer!

Selling Price -$5,500.00
No Images Available

Selling Price -

$5,500.00

HD Certified Pre-Owned
  • Width:60 in
  • Engine Type:Gas
  • Drive Type:2WD
  • 20x11-10 knobby traction tires
  • 2018
  • John Deere
  • Z915E
  • 48
  • Riding
  • CV742
  • At 3,600 rpm, 25 hp (18.6 kW)
  • 45.6 cu in. (747 cc)
  • Two
  • Full flow, replaceable
  • Full pressure
  • Air
  • Pre-cleaner, Yes, Heavy-duty canister type with safety element
  • Gasoline
  • Electro-magnetic, 200 lb-ft (271 Nm) | Drive: V-belt
  • Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor
  • Hydrostatic
  • Dynamic: Twin levers
  • Internal wet disk integrated in the transmission | actuation: Hand brake
  • Drive: 24x9.5-12
  • Load rating: 4 PR
  • type: Pneumatic Front | size: 13x5-6 | Front anti-scalp rollers: RH, center, LH
  • 12 V
  • 15 amp
  • Cold cranking amp: 300 amp
  • Speed range: 0-10 mph (0-16.1 km/h) | Travel, Forward: 0-10 mph (0-16.1 km/h) | Travel, Reverse: 0-4.5 mph (0-7.2 km/h)
  • Speed and direction control: Twin levers | Filter: Internal, replaceable
  • Blades, Tip Approximately: 18,000 fpm (5,486 m/min)
  • 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr) Under normal conditions, load, operation, and dependent on loads and operating conditions
  • One-piece stamped steel with reinforcements
  • 7 gauge 0.18 in. (4.6 mm)
  • Side
  • Blades Thickness: 0.25 in. (0.64 cm) | Mower deck: 48 in. (122 cm)
  • With chute down: 62 in (157 cm)
  • of-cut range, Increments: 0.25 in. (0.64 cm), 1-5.5 in. (2.54-14 cm) | With ROPS up: 73 in. (185 cm) | With ROPS down: 47 in. (119 cm)
  • 48 in (122 cm)
  • 84 in. (213 cm) | Blades: Varies by deck size
  • 5.9 U.S. qt (5.6 L) | Crankcase With filter: 2 U.S. qt (1.9 L)
  • 11.5 U.S. gal. (43.5 L)
  • 1,100 to 1,178 lb (499 to 534 kg)
  • Fuel tank switch/shut-off valve | Hour meter: Standard, digital | Operator presence starting system: Brake-N-Go (hand)
  • Three
  • 36 months or 1200 hours, whichever comes first, First 24 months, no hour limitation
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $5,500.00
  • Port Crane, New York
  • Pre-Owned
  • 81729
  • 2018
  • John Deere
  • Z915E 48
  • 1TC915ECLJT062401
  • CV742
  • 25
  • 545
  • Hydrostatic
  • Gasoline
  • Available
  • With chute down: 62 in (157 cm)
  • of-cut range, Increments: 0.25 in. (0.64 cm), 1-5.5 in. (2.54-14 cm) | With ROPS up: 73 in. (185 cm) | With ROPS down: 47 in. (119 cm)

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.